The Lämneå “control line” wire drawing machine is a non slip, non accumulating continuous wire drawing machine which has become the standard of the industry for the production of large and medium diameter carbon and alloy steel wire. It is equipped with a modern PLC based control system which gives a total overview of the process.
The drawing machine is very flexible allowing start from any block, bypass any block/blocks, any number and finish on any block you want.
Lämneå development in the fields of control and maintenance have resulted in a design of unparalleled ease of operation and reliability. Our extensive expertise in the aspects of wire drawing industry gives us ability to provide high performance turn-key production facilities anywhere in the world.
The wire is routed from the upper part of each block via the control arm and then through the next die, in a straight line, and onto the lower part of the following block.
This path results in the wire being bent in one plain only and, by this, make the design compatible with the drawing of large diameter carbon steel and alloy wires.
The tilted table design enables a high volume of wire to be stored on each block and the high level wire accumulation provides the optimum conditions for effective cooling. Depending on your wire drawing you can adjust the tilting to your preferred and most suitable level.
The Total Life Time Cost of a Lämneå Drawing machine is very low and the safety is according to the latest European standards.
When buying a Lämneå Drawing machine You can expect world class service assistance.
|Number of blocks||2 -14|
|Block diameter||350, 420, 500, 600, 800 and 900 mm|
|Block coating||Tungsten carbide|
|Motor power||5.5 – 110 kW AC|
|Speed control||Control arms|
|Inlet wire diameter||5.5 – 15 mm|
|Wire quality||LC – HC|
|Speed||up to 30 m/s|
- Soap stirrer
- Rotating die holder
- Dust extraction